The Detailer - 13798 144th Street - Live Oak - FL 32060 - Phone : (850) 603-3108
Details - About The Detailer The Detailer is water based, water thinnable, water soluable, and water clean up.  It can be used on all types of modeling and crafts.  The Detailer can be applied with a brush, foam brush, or air brush.  You can also dip parts in it.  The Detailer can be thinned with water for airbrush, or to reduce color density. You can mix The Detailer colors together to make other colors.  The Detailer can also be sealed with clear lacquer, clear enamel, and clear urethanes.  Do not use water base sealers, as The Detailer is water soluable.  You can remove unwanted or excess Detailer with a damp cotton swab. Directions Brush: Using a fine brush, fairly wet, apply and let flow on.  Some parts may need a second application, let dry for approximately 20 - 30 minutes.  Air brush can also be used. Chrome: Apply liquid in light coats as desired for color density.  May be thinned with water. Clear Plastic: Apply one fairly wet coat from the bottle, so liquid will flow.  May be thinned with water to reduce color density. The Detailer may also be coated with clear enamel.  Please NOTE:  The Detailer is not a paint.  Parts should be washed in soap and water to remove any mold release residue, wax, or grease.
the  DetaileR